Australia Wide Delivery & Beyond
Australian Made & Owned
Factory Direct
Ph. 07 3715 8000
Pre-Painted White Kit Shutters Specifications
ShutterKits Offer fast delivery of custom made to measure & easy to assemble Interior White pre-painted (poplar) shutter kits that require painting on the ends of the blades and once assembled, the top & bottom of the shutter. Then they are ready for you to install. Poplar is a strong durable timber that machines well making it an excellent timber for our factory to use. Poplar being a very light coloured timber also makes it easy to paint. The timber components are coated in an eco-friendly white satin paint.
 | Pivots are Machined on the end of the blades - No plastic parts to break down in the sun. |
 | Stile & Rail Joints are Mortise & Tenon.- Stronger than dowells - Widths are able to span further without the shutter "Dropping" out of square. |
 | Stainless Steel pre-stapled blades are linked with a quick-fit alloy strip that is pressed into the Tilt Bar that can be fitted on the centre or offset to either side against the stile. |
SHUTTER BLADE OPENING OPTIONS: | |
 | Traditional Tilt Rod Shutters.Centre Rotation a Tilt rod that is attached to the Centre of the pre-stapled blade to open and close the shutter blades/Louvers. Offset Rotation is a Tilt rod that is attached to the side of the pre-stapled blade to open and close the shutter blades. |
 | Clearview Shutters.Clearview is also available for those that prefer the louvre look. Clearview opening shutters have a link bar that is attached at the rear of the shutter. There is no visible bar when open. Opening the shutter is by opening 1 blade which in turn opens all the others. |
 | All components are supplied machined to size. |
 | The standard stiles are flat but we still have the fluted design feature available for those that prefer it. |
 | The ShutterKits design is unique allowing the average handyperson to produce a shutter which rivals the best on the market. |
 | ShutterKits Blade design can be chosen from the options below: 89mm Elliptical Blade. |
| A simple, adjustable blade tensioning mechanism is used to give smooth operation of the blades. | |
| ShutterKits will manufacture your Kits in approximately in 1 - 2 weeks and then send it to you in a flat pack. (The carton is usually the length of the stiles x 2 ShutterKits.) (Cedar Kit Shown). | |
| Assembly of a ShutterKit requires only basic tools and can be completed in an average of 10 to 15 minutes per shutter. | |
 | ShutterKits are able to supply all hardware and accessories giving you complete ready-to-finish and assemble, highest quality shutters for your home. |
All ShutterKits kits come with comprehensive illustrated assembly instructions.
design